Home > Kayak Accessories
Choose a sub category:
Bonafide Kayaks Feel Free Kayaks Jonny Boats
Yak gadget 3 waters Paddle Kayaks
Vibe Kayaks PFD/Life Jackets Savour Outdoors Products
Nucanoe Accessories
Sort By:
Page of 4
Feelfree track adapter Railblaza C-Tug Toggle Lock Feelfree Fishing Rod Holder - Flush Round - Large
Adapter for feelfree track system. Fits feelfree,  3 waters, Jonny boats, seastream kayaks The C-Tug Replacement Toggle Lock and Pin is a set of replacement parts for the green wheel locking stoppers on the C-Tug Kayak and Canoe Cart. The green wheel locking stoppers come in pairs, which make ordering one pair (Quantity 1) enough parts to fix both left and right wheel sides of your C-Tug. This holder is a great way to ensure security of your finish rod on the kayak. Designed for almost all kayaks, including the most recreational models by Feelfree, this Flush Mounted Rod Holder is a great way to install fishing rods in the kayak. Its straightforward design comes with a round base, which allows you to carry your fishing rod without adding extra clutter to the deck. The rod holder includes a rod leash that keeps the equipment secure. The best feature of this rod holder is that it is flush with the kayak’s deck, so you won’t have to worry about snagging at the time of fishing, loading, and unloading.
Yak Gear FISHnPOLE Leash YakAttack MMGLXL-06-DS GridLoc MightyMount XL Track - 6", Desert Sand YakAttack MMGLXL-06-OG GridLoc MightyMount XL Track - 6", Olive Green
Yak Gear FISHnPOLE Leash
Our Price: $12.99
Boy do I wish I had one of these the first time I went out!  Nothing like Making a cast and hooking into your jig rod and tossing it into the water!!!  Well, with the YAK Gear  Fishing Rod Leash this is easily avoided. Double braided for extra strength, the nonabsorbent Yak Gear FISHnPOLE Leash provides the ultimate peace of mind that your  rod and reel come home with you after your day on the water. The boat-side of the 0.7 ounce, 36 inch leash quickly connects to a pad eye or accessible seat strap with the carabiner or by threading the loop through.  The connection to the fishing pole is through the use of the ultra tight velcro strap slipped over the butt of the fishing pole, just below the trigger of the reel.

The Desert Sand and Olive Green color options are part of our 2022 Fall Color Release. These are not part of a special or limited edition run. Instead, if a product/color sells well and the response from our retailers and customers are positive then a color in a specific product might stick around for a few seasons.

The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. A textured upper surface adds grip while making the GridLoc MightyMount XL one of the best-looking accessory mounts on the market. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security.

The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.

The Desert Sand and Olive Green color options are part of our 2022 Fall Color Release. These are not part of a special or limited edition run. Instead, if a product/color sells well and the response from our retailers and customers are positive then a color in a specific product might stick around for a few seasons.

The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. A textured upper surface adds grip while making the GridLoc MightyMount XL one of the best-looking accessory mounts on the market. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security.

The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.

Feelfree Fishing Rod Holders - Flush Rectangular - Medium (Pair) YakAttack MMGLXL-09-DS GridLoc MightyMount XL Track - 9", Desert Sand YakAttack MMGLXL-09-OG GridLoc MightyMount XL Track - 9", Olive Green
The Feelfree Flush Mounted Rod Holder with rectangular base provides many of the similar functionalities as the round base model. It is designed to fit smaller areas, which makes it an ideal choice for any kind of kayak, including the most recreational models from Feelfree. The mounted rod holder comes with an incorporated rod leash to make sure that the gear is nicely secured. The flush mounted rod holder comes with all necessary hardware to make installation process easy and hassle free. The holder comes in a set of two. Their meticulous construction is bound to last long against the gushing and crashing waves of free water.

The Desert Sand and Olive Green color options are part of our 2022 Fall Color Release. These are not part of a special or limited edition run. Instead, if a product/color sells well and the response from our retailers and customers are positive then a color in a specific product might stick around for a few seasons.

The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. A textured upper surface adds grip while making the GridLoc MightyMount XL one of the best-looking accessory mounts on the market. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security.

The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.

The Desert Sand and Olive Green color options are part of our 2022 Fall Color Release. These are not part of a special or limited edition run. Instead, if a product/color sells well and the response from our retailers and customers are positive then a color in a specific product might stick around for a few seasons.

The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. A textured upper surface adds grip while making the GridLoc MightyMount XL one of the best-looking accessory mounts on the market. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security.

The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.

TetherTube Rod Holder with Mounting Hardware MultiMount Cup Holder MultiMount Cup Holder, Battleship Grey
After years of using the standard rod tube on the YakAttack BlackPak, we knew it was time to add our YakAttack flair and design a product that was worthy of the YakAttack name. New for 2022 and launching along with the BlackPak Pro comes the introduction of the all-new TetherTube. The TetherTube was modeled after our popular AR Tube Rod Holder and works flawlessly with spinning and casting rods. The angled lead-in at the top of the TetherTube makes it a breeze to insert your rods and helps lock in your casting and spinning reels keeping them aligned and ready. For added security, the integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired.

The Tether Tube is compatible with the BlackPak Pro but will not work with the classic BlackPak. Made from marine grade polymers, the Tether Tube is built to last and comes with our Built for Life Guarantee. The included hardware kit allows for installs on the BlackPak Pro or applications where a nut and washer are needed.
 		The YakAttack MultiMount Cup Holder quickly and easily attaches to most kayak track systems. Designed for maximum versatility, the MultiMount Cup Holder accepts anything from stainless steel tumblers to Nalgene®  Bottles to 12 oz cans and water bottles. Not thirsty? The MultiMount Cup Holder also makes a great place to put small tools and other items! Made in the USA from premium materials for a lifetime of use in even the harshest environments. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). The YakAttack MultiMount Cup Holder quickly and easily attaches to most kayak track systems. Designed for maximum versatility, the MultiMount Cup Holder accepts anything from stainless steel tumblers to Nalgene®  Bottles to 12 oz cans and water bottles. Not thirsty? The MultiMount Cup Holder also makes a great place to put small tools and other items! Made in the USA from premium materials for a lifetime of use in even the harshest environments. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
MultiMount Cup Holder, YakAttack Orange YakAttack MMGLXL-12-DS GridLoc MightyMount XL Track - 12", Desert Sand YakAttack MMGLXL-12-OG GridLoc MightyMount XL Track - 12", Olive Green
The YakAttack MultiMount Cup Holder quickly and easily attaches to most kayak track systems. Designed for maximum versatility, the MultiMount Cup Holder accepts anything from stainless steel tumblers to Nalgene®  Bottles to 12 oz cans and water bottles. Not thirsty? The MultiMount Cup Holder also makes a great place to put small tools and other items! Made in the USA from premium materials for a lifetime of use in even the harshest environments. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).

The Desert Sand and Olive Green color options are part of our 2022 Fall Color Release. These are not part of a special or limited edition run. Instead, if a product/color sells well and the response from our retailers and customers are positive then a color in a specific product might stick around for a few seasons.

The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. A textured upper surface adds grip while making the GridLoc MightyMount XL one of the best-looking accessory mounts on the market. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security.

The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. The 12" GridLoc MightyMount XL is intended to be mounted on the 16" side of the BlackPak Pro, so if you are wanting to attach the GridLoc MightyMount XL to a 13x13 or the short side on a 13x16 BlackPak Pro the 6" and 9" lengths are recommended. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.

The Desert Sand and Olive Green color options are part of our 2022 Fall Color Release. These are not part of a special or limited edition run. Instead, if a product/color sells well and the response from our retailers and customers are positive then a color in a specific product might stick around for a few seasons.

The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. A textured upper surface adds grip while making the GridLoc MightyMount XL one of the best-looking accessory mounts on the market. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security.

The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. The 12" GridLoc MightyMount XL is intended to be mounted on the 16" side of the BlackPak Pro, so if you are wanting to attach the GridLoc MightyMount XL to a 13x13 or the short side on a 13x16 BlackPak Pro the 6" and 9" lengths are recommended. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.

Railblaza C-Tug Kickstand Jonny Boats High-Ride Seat Bag DoubleHeader Track Mount
Railblaza C-Tug Kickstand
Our Price: $17.99
The C-Tug replacement kickstand is a one piece part. The C-tug will need to be dismantled to allow fitting of the new part. Jonny High Ride Seat bag is a multipurpose Kayak storage box that will make your kayaking more convenient, where you can easily store your items- snacks, water bottles, your fishing equipment’s and other valuables.
In typical YakAttack fashion, what started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The end result of the DoubleHeader Track Mount was a unique addition to the YakAttack product line that allows the ability to attach various accessories using a single attachment point. If you already own two RotoGrip Paddle Holders, then simply remove the rubber washer included with your paddle holders, insert the MightyBolt through the underside of the DoubleHeader, and tighten the body of the RotoGrip. The DoubleHeader in that configuration provides the perfect offset paddle holder solution moving your paddle off the side of your kayak, freeing up track space. Let’s say you want to add dual Omega Rod Holders for crappie fishing. The mounting holes at the end of the DoubleHeader are LockNLoad compatible and allow for easy attachment of LockNLoad accessories like the Omega or Omega Pro. Looking to maximize the number of rods on your kayak for tournament day? The DoubleHeader Track Mount serves as the perfect mounting system for dual AR Tube Rod Holders.

If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob and MightyBolt from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory-installed kayak track.

Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.

The DoubleHeader Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.
Yakgadget QuickCup Cup Holder XD TetherTube Rod Holder- Two Pack with Mounting Hardware TracPak Stackable Storage Box, Spare Box
Easy to install to your gear track. Swivel the cup holder to position it inside or outside your kayak.
After years of using the standard rod tube on the YakAttack BlackPak, we knew it was time to add our YakAttack flair and design a product that was worthy of the YakAttack name. New for 2022 and launching along with the BlackPak Pro comes the introduction of the all-new TetherTube. The TetherTube was modeled after our popular AR Tube Rod Holder and works flawlessly with spinning and casting rods. The angled lead-in at the top of the TetherTube makes it a breeze to insert your rods and helps lock in your casting and spinning reels keeping them aligned and ready. For added security, the integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired.

The Tether Tube is compatible with the BlackPak Pro but will not work with the classic BlackPak. Made from marine grade polymers, the Tether Tube is built to last and comes with our Built for Life Guarantee. The included hardware kit allows for installs on the BlackPak Pro or applications where a nut and washer are needed.
Secure, quick access, and versatility were the foundational requirements when designing the TracPak. We wanted the ability to mount one or two storage boxes on a MightyMount or GearTrac, and with the TracPak, you can stack two boxes onto a single mounting point, helping save track space for other accessories. Please note this is only the TrackPak Spare Box and the Quick Release Base is sold separately or all together as part of our two-pack combo kit.

The stackable storage boxes quickly and securely snap onto the base (sold separately) and on top of each other. When two boxes are stacked on top of each other, you have the ability to not only access the top box, but you can access the bottom box. With interior dimensions measuring 8.375” x 5.375” x 2.375”, there are many ways to utilize this secure quick access storage box. From tools to terminal tackle, the TracPack is a unique and handy storage solution for both recreational and kayak anglers. The TracPak is not waterproof or water-tight and does not float, so each storage box features an eyelet if you choose to use a leash for added security. For enhanced organization, included are four white labels. These adhesive labels are designed to fit on the latch of the box and create an area to identify the contents inside using a permanent marker like a Sharpie. Additional TrackPak boxes and the quick release base are also sold separately.

When used with the optional TrackPak Quick Release Base you have the ability to attach the system to any YakAttack MightyMounts, GearTrac and most other factory-installed kayak track. If you would rather surface mount the quick release base, included with the Quick Release Base are stainless steel screws for attachment on the BlackPak Pro, the deck of your kayak, or other flat surfaces. Made from marine-grade polymers, the TracPak is designed for use in harsh marine conditions. It is made in the USA and backed by our Built for Life Guarantee.
TracPak Stackable Storage Box, Spare Box, Battleship Grey TracPak Stackable Storage Box, Spare Box, Orange Railblaza C-Tug Hull Pad
Railblaza C-Tug Hull Pad
Our Price: $25.99
Secure, quick access, and versatility were the foundational requirements when designing the TracPak. We wanted the ability to mount one or two storage boxes on a MightyMount or GearTrac, and with the TracPak, you can stack two boxes onto a single mounting point, helping save track space for other accessories. Please note this is only the TrackPak Spare Box and the Quick Release Base is sold separately or all together as part of our two-pack combo kit.

The stackable storage boxes quickly and securely snap onto the base (sold separately) and on top of each other. When two boxes are stacked on top of each other, you have the ability to not only access the top box, but you can access the bottom box. With interior dimensions measuring 8.375” x 5.375” x 2.375”, there are many ways to utilize this secure quick access storage box. From tools to terminal tackle, the TracPack is a unique and handy storage solution for both recreational and kayak anglers. The TracPak is not waterproof or water-tight and does not float, so each storage box features an eyelet if you choose to use a leash for added security. For enhanced organization, included are four white labels. These adhesive labels are designed to fit on the latch of the box and create an area to identify the contents inside using a permanent marker like a Sharpie. Additional TrackPak boxes and the quick release base are also sold separately.

When used with the optional TrackPak Quick Release Base you have the ability to attach the system to any YakAttack MightyMounts, GearTrac and most other factory-installed kayak track. If you would rather surface mount the quick release base, included with the Quick Release Base are stainless steel screws for attachment on the BlackPak Pro, the deck of your kayak, or other flat surfaces. Made from marine-grade polymers, the TracPak is designed for use in harsh marine conditions. It is made in the USA and backed by our Built for Life Guarantee.
Secure, quick access, and versatility were the foundational requirements when designing the TracPak. We wanted the ability to mount one or two storage boxes on a MightyMount or GearTrac, and with the TracPak, you can stack two boxes onto a single mounting point, helping save track space for other accessories. Please note this is only the TrackPak Spare Box and the Quick Release Base is sold separately or all together as part of our two-pack combo kit.

The stackable storage boxes quickly and securely snap onto the base (sold separately) and on top of each other. When two boxes are stacked on top of each other, you have the ability to not only access the top box, but you can access the bottom box. With interior dimensions measuring 8.375” x 5.375” x 2.375”, there are many ways to utilize this secure quick access storage box. From tools to terminal tackle, the TracPack is a unique and handy storage solution for both recreational and kayak anglers. The TracPak is not waterproof or water-tight and does not float, so each storage box features an eyelet if you choose to use a leash for added security. For enhanced organization, included are four white labels. These adhesive labels are designed to fit on the latch of the box and create an area to identify the contents inside using a permanent marker like a Sharpie. Additional TrackPak boxes and the quick release base are also sold separately.

When used with the optional TrackPak Quick Release Base you have the ability to attach the system to any YakAttack MightyMounts, GearTrac and most other factory-installed kayak track. If you would rather surface mount the quick release base, included with the Quick Release Base are stainless steel screws for attachment on the BlackPak Pro, the deck of your kayak, or other flat surfaces. Made from marine-grade polymers, the TracPak is designed for use in harsh marine conditions. It is made in the USA and backed by our Built for Life Guarantee.
 		The C-Tug Replacement Hull Pad is a single piece replacement hull pad platform for the C-Tug Kayak and Canoe Cart compatible with all C-Tug models using the integrated snap and lock technology.
Feelfree track adapter Feelfree Uni Track Accessory Mount Plate Jonny Boats Uni-Track Accessory Plate
Adapter for feelfree track system. Fits feelfree,  3 waters, Jonny boats, seastream kayaks The Feelfree Uni-Track accessory mount system is an innovation in kayak fishing features. There is no need of drilling holes in the Feelfree kayak to mount kayak fishing equipment. You’ve to simply attach your equipment to the Uni-Track plate and afterwards insert the Runner into the Track Rail. Make sure the locking levers are cammed in place. You can easily slide the plate back and forth on the track rail by releasing the cams. When locked, you'll get a strong connection to your supplies. The Feelfree Uni-Track is compatible with all 3 Waters and Feelfree kayaks that come with the integrated Uni-Track system. Also, it is compatible with most of the famous equipment on the market. The Jonny boats Feelfree Uni-Track accessory mount system is a breakthrough in kayak fishing customization.
Yakgadget QuickMount Control Arm (Foot Steering) RotoGrip Phone Holder, Phone Holder and Tether Only Vibe shearwater steering handle
QuickMount Control Arm (Foot Steering) is compatible with popular motor shafts. It can be used for pole steering or foot steering by attaching cables. This control arm set is designed for a 180-degree range of motion. The QuickMount MK comes with all hardware needed for its installation. This control arm will enable you to easily maneuver your kayak and make precise turns when you in different waters.
The YakAttack RotoGrip Phone Holder is exactly the phone holder you would expect from YakAttack. Its revolutionary design is unlike anything that exists on the market and utilizes our popular RotoGrip technology allowing for quick one-handed operation. The phone holder features two adjustable rubber wheels that securely holds most modern-day smartphones and the width settings can easily be adjusted. Compatible with smartphones ranging from: 2.75” to 3.625” wide, 0.303” to 0.625” in thickness.

This version of the RotoGrip Phone Holder includes the phone holder with no base mount or double socket connector and our Universal Smartphone Harness and Tether. The 1” ball on the back of the phone holder frame is compatible with popular 1” ball mounts from brands such as YakAttack, Ram Mounts, Scotty Fishing Products, and more.

Built into the phone holder is our 1” ball system that allows for easy articulation to achieve a wide variety of positions. The 1” ball mount on the back of the phone holder is also used to adjust the width of the frame and retention wheels. Pulling against the ball releases the spring-loaded gear and allows you to twist clockwise or counter-clockwise to adjust the width to your phone. To find the correct position for your phone, adjust the arms so that your phone is securely held in place. Your phone should roll firmly into place with one-handed operation when the settings are correct.

The included Universal Smartphone Harness and Tether features a flexible and grippy silicone interface, this harness accommodates devices with or without a case, ensuring that your phone is snugly held in place. Included with the harness is a coiled coated steel tether (9" coiled, 48" fully stretched) with locking carabiner. The carabiner is designed to attach to the tether point found on the frame of the phone holder giving you extra peace of mind that you phone is safe and sound. Engineered for ease of use, the harness allows for effortless access to your phone’s functions and is designed to not interfere or block the camera lens.

The YakAttack RotoGrip Phone Holder is built from UV-resistant, high-quality, injection-molded polymers and assembled with stainless steel hardware. Designed to withstand years of use in harsh outdoor and marine environments, the RotoGrip Phone Holder is backed by our Built for Life Guarantee. This phone holder is designed to securely hold your smartphone while on the water. However, we are not liable for any loss, damage, or malfunction of your device during use. It is essential to use the included harness and tether and ensure your phone is properly secured. Use at your own risk.
 		The steering handle for the shearwater. When you are using pedal power you need to use a steering handle.  This is the way to go for the shearwater.