Home > Yak attack
Sort By:
Page of 2
YakAttack MMGLXL-06-DS GridLoc MightyMount XL Track - 6", Desert Sand YakAttack MMGLXL-06-OG GridLoc MightyMount XL Track - 6", Olive Green YakAttack MMGLXL-09-DS GridLoc MightyMount XL Track - 9", Desert Sand

The Desert Sand and Olive Green color options are part of our 2022 Fall Color Release. These are not part of a special or limited edition run. Instead, if a product/color sells well and the response from our retailers and customers are positive then a color in a specific product might stick around for a few seasons.

The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. A textured upper surface adds grip while making the GridLoc MightyMount XL one of the best-looking accessory mounts on the market. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security.

The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.

The Desert Sand and Olive Green color options are part of our 2022 Fall Color Release. These are not part of a special or limited edition run. Instead, if a product/color sells well and the response from our retailers and customers are positive then a color in a specific product might stick around for a few seasons.

The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. A textured upper surface adds grip while making the GridLoc MightyMount XL one of the best-looking accessory mounts on the market. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security.

The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.

The Desert Sand and Olive Green color options are part of our 2022 Fall Color Release. These are not part of a special or limited edition run. Instead, if a product/color sells well and the response from our retailers and customers are positive then a color in a specific product might stick around for a few seasons.

The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. A textured upper surface adds grip while making the GridLoc MightyMount XL one of the best-looking accessory mounts on the market. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security.

The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.

YakAttack MMGLXL-09-OG GridLoc MightyMount XL Track - 9", Olive Green TetherTube Rod Holder with Mounting Hardware MultiMount Cup Holder

The Desert Sand and Olive Green color options are part of our 2022 Fall Color Release. These are not part of a special or limited edition run. Instead, if a product/color sells well and the response from our retailers and customers are positive then a color in a specific product might stick around for a few seasons.

The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. A textured upper surface adds grip while making the GridLoc MightyMount XL one of the best-looking accessory mounts on the market. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security.

The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.

After years of using the standard rod tube on the YakAttack BlackPak, we knew it was time to add our YakAttack flair and design a product that was worthy of the YakAttack name. New for 2022 and launching along with the BlackPak Pro comes the introduction of the all-new TetherTube. The TetherTube was modeled after our popular AR Tube Rod Holder and works flawlessly with spinning and casting rods. The angled lead-in at the top of the TetherTube makes it a breeze to insert your rods and helps lock in your casting and spinning reels keeping them aligned and ready. For added security, the integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired.

The Tether Tube is compatible with the BlackPak Pro but will not work with the classic BlackPak. Made from marine grade polymers, the Tether Tube is built to last and comes with our Built for Life Guarantee. The included hardware kit allows for installs on the BlackPak Pro or applications where a nut and washer are needed.
 		The YakAttack MultiMount Cup Holder quickly and easily attaches to most kayak track systems. Designed for maximum versatility, the MultiMount Cup Holder accepts anything from stainless steel tumblers to Nalgene®  Bottles to 12 oz cans and water bottles. Not thirsty? The MultiMount Cup Holder also makes a great place to put small tools and other items! Made in the USA from premium materials for a lifetime of use in even the harshest environments. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
MultiMount Cup Holder, Battleship Grey MultiMount Cup Holder, YakAttack Orange YakAttack MMGLXL-12-DS GridLoc MightyMount XL Track - 12", Desert Sand
The YakAttack MultiMount Cup Holder quickly and easily attaches to most kayak track systems. Designed for maximum versatility, the MultiMount Cup Holder accepts anything from stainless steel tumblers to Nalgene®  Bottles to 12 oz cans and water bottles. Not thirsty? The MultiMount Cup Holder also makes a great place to put small tools and other items! Made in the USA from premium materials for a lifetime of use in even the harshest environments. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). The YakAttack MultiMount Cup Holder quickly and easily attaches to most kayak track systems. Designed for maximum versatility, the MultiMount Cup Holder accepts anything from stainless steel tumblers to Nalgene®  Bottles to 12 oz cans and water bottles. Not thirsty? The MultiMount Cup Holder also makes a great place to put small tools and other items! Made in the USA from premium materials for a lifetime of use in even the harshest environments. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).

The Desert Sand and Olive Green color options are part of our 2022 Fall Color Release. These are not part of a special or limited edition run. Instead, if a product/color sells well and the response from our retailers and customers are positive then a color in a specific product might stick around for a few seasons.

The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. A textured upper surface adds grip while making the GridLoc MightyMount XL one of the best-looking accessory mounts on the market. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security.

The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. The 12" GridLoc MightyMount XL is intended to be mounted on the 16" side of the BlackPak Pro, so if you are wanting to attach the GridLoc MightyMount XL to a 13x13 or the short side on a 13x16 BlackPak Pro the 6" and 9" lengths are recommended. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.

YakAttack MMGLXL-12-OG GridLoc MightyMount XL Track - 12", Olive Green DoubleHeader Track Mount TetherTube Rod Holder- Two Pack with Mounting Hardware

The Desert Sand and Olive Green color options are part of our 2022 Fall Color Release. These are not part of a special or limited edition run. Instead, if a product/color sells well and the response from our retailers and customers are positive then a color in a specific product might stick around for a few seasons.

The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. A textured upper surface adds grip while making the GridLoc MightyMount XL one of the best-looking accessory mounts on the market. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security.

The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. The 12" GridLoc MightyMount XL is intended to be mounted on the 16" side of the BlackPak Pro, so if you are wanting to attach the GridLoc MightyMount XL to a 13x13 or the short side on a 13x16 BlackPak Pro the 6" and 9" lengths are recommended. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.

In typical YakAttack fashion, what started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The end result of the DoubleHeader Track Mount was a unique addition to the YakAttack product line that allows the ability to attach various accessories using a single attachment point. If you already own two RotoGrip Paddle Holders, then simply remove the rubber washer included with your paddle holders, insert the MightyBolt through the underside of the DoubleHeader, and tighten the body of the RotoGrip. The DoubleHeader in that configuration provides the perfect offset paddle holder solution moving your paddle off the side of your kayak, freeing up track space. Let’s say you want to add dual Omega Rod Holders for crappie fishing. The mounting holes at the end of the DoubleHeader are LockNLoad compatible and allow for easy attachment of LockNLoad accessories like the Omega or Omega Pro. Looking to maximize the number of rods on your kayak for tournament day? The DoubleHeader Track Mount serves as the perfect mounting system for dual AR Tube Rod Holders.

If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob and MightyBolt from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory-installed kayak track.

Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.

The DoubleHeader Track Mount is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.
After years of using the standard rod tube on the YakAttack BlackPak, we knew it was time to add our YakAttack flair and design a product that was worthy of the YakAttack name. New for 2022 and launching along with the BlackPak Pro comes the introduction of the all-new TetherTube. The TetherTube was modeled after our popular AR Tube Rod Holder and works flawlessly with spinning and casting rods. The angled lead-in at the top of the TetherTube makes it a breeze to insert your rods and helps lock in your casting and spinning reels keeping them aligned and ready. For added security, the integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired.

The Tether Tube is compatible with the BlackPak Pro but will not work with the classic BlackPak. Made from marine grade polymers, the Tether Tube is built to last and comes with our Built for Life Guarantee. The included hardware kit allows for installs on the BlackPak Pro or applications where a nut and washer are needed.
TracPak Stackable Storage Box, Spare Box TracPak Stackable Storage Box, Spare Box, Battleship Grey TracPak Stackable Storage Box, Spare Box, Orange
Secure, quick access, and versatility were the foundational requirements when designing the TracPak. We wanted the ability to mount one or two storage boxes on a MightyMount or GearTrac, and with the TracPak, you can stack two boxes onto a single mounting point, helping save track space for other accessories. Please note this is only the TrackPak Spare Box and the Quick Release Base is sold separately or all together as part of our two-pack combo kit.

The stackable storage boxes quickly and securely snap onto the base (sold separately) and on top of each other. When two boxes are stacked on top of each other, you have the ability to not only access the top box, but you can access the bottom box. With interior dimensions measuring 8.375” x 5.375” x 2.375”, there are many ways to utilize this secure quick access storage box. From tools to terminal tackle, the TracPack is a unique and handy storage solution for both recreational and kayak anglers. The TracPak is not waterproof or water-tight and does not float, so each storage box features an eyelet if you choose to use a leash for added security. For enhanced organization, included are four white labels. These adhesive labels are designed to fit on the latch of the box and create an area to identify the contents inside using a permanent marker like a Sharpie. Additional TrackPak boxes and the quick release base are also sold separately.

When used with the optional TrackPak Quick Release Base you have the ability to attach the system to any YakAttack MightyMounts, GearTrac and most other factory-installed kayak track. If you would rather surface mount the quick release base, included with the Quick Release Base are stainless steel screws for attachment on the BlackPak Pro, the deck of your kayak, or other flat surfaces. Made from marine-grade polymers, the TracPak is designed for use in harsh marine conditions. It is made in the USA and backed by our Built for Life Guarantee.
Secure, quick access, and versatility were the foundational requirements when designing the TracPak. We wanted the ability to mount one or two storage boxes on a MightyMount or GearTrac, and with the TracPak, you can stack two boxes onto a single mounting point, helping save track space for other accessories. Please note this is only the TrackPak Spare Box and the Quick Release Base is sold separately or all together as part of our two-pack combo kit.

The stackable storage boxes quickly and securely snap onto the base (sold separately) and on top of each other. When two boxes are stacked on top of each other, you have the ability to not only access the top box, but you can access the bottom box. With interior dimensions measuring 8.375” x 5.375” x 2.375”, there are many ways to utilize this secure quick access storage box. From tools to terminal tackle, the TracPack is a unique and handy storage solution for both recreational and kayak anglers. The TracPak is not waterproof or water-tight and does not float, so each storage box features an eyelet if you choose to use a leash for added security. For enhanced organization, included are four white labels. These adhesive labels are designed to fit on the latch of the box and create an area to identify the contents inside using a permanent marker like a Sharpie. Additional TrackPak boxes and the quick release base are also sold separately.

When used with the optional TrackPak Quick Release Base you have the ability to attach the system to any YakAttack MightyMounts, GearTrac and most other factory-installed kayak track. If you would rather surface mount the quick release base, included with the Quick Release Base are stainless steel screws for attachment on the BlackPak Pro, the deck of your kayak, or other flat surfaces. Made from marine-grade polymers, the TracPak is designed for use in harsh marine conditions. It is made in the USA and backed by our Built for Life Guarantee.
Secure, quick access, and versatility were the foundational requirements when designing the TracPak. We wanted the ability to mount one or two storage boxes on a MightyMount or GearTrac, and with the TracPak, you can stack two boxes onto a single mounting point, helping save track space for other accessories. Please note this is only the TrackPak Spare Box and the Quick Release Base is sold separately or all together as part of our two-pack combo kit.

The stackable storage boxes quickly and securely snap onto the base (sold separately) and on top of each other. When two boxes are stacked on top of each other, you have the ability to not only access the top box, but you can access the bottom box. With interior dimensions measuring 8.375” x 5.375” x 2.375”, there are many ways to utilize this secure quick access storage box. From tools to terminal tackle, the TracPack is a unique and handy storage solution for both recreational and kayak anglers. The TracPak is not waterproof or water-tight and does not float, so each storage box features an eyelet if you choose to use a leash for added security. For enhanced organization, included are four white labels. These adhesive labels are designed to fit on the latch of the box and create an area to identify the contents inside using a permanent marker like a Sharpie. Additional TrackPak boxes and the quick release base are also sold separately.

When used with the optional TrackPak Quick Release Base you have the ability to attach the system to any YakAttack MightyMounts, GearTrac and most other factory-installed kayak track. If you would rather surface mount the quick release base, included with the Quick Release Base are stainless steel screws for attachment on the BlackPak Pro, the deck of your kayak, or other flat surfaces. Made from marine-grade polymers, the TracPak is designed for use in harsh marine conditions. It is made in the USA and backed by our Built for Life Guarantee.
RotoGrip Phone Holder, Phone Holder and Tether Only Leader Board Double Header Track Mount DoubleHeader with dual ParkNPole RotoGrips, Black
The YakAttack RotoGrip Phone Holder is exactly the phone holder you would expect from YakAttack. Its revolutionary design is unlike anything that exists on the market and utilizes our popular RotoGrip technology allowing for quick one-handed operation. The phone holder features two adjustable rubber wheels that securely holds most modern-day smartphones and the width settings can easily be adjusted. Compatible with smartphones ranging from: 2.75” to 3.625” wide, 0.303” to 0.625” in thickness.

This version of the RotoGrip Phone Holder includes the phone holder with no base mount or double socket connector and our Universal Smartphone Harness and Tether. The 1” ball on the back of the phone holder frame is compatible with popular 1” ball mounts from brands such as YakAttack, Ram Mounts, Scotty Fishing Products, and more.

Built into the phone holder is our 1” ball system that allows for easy articulation to achieve a wide variety of positions. The 1” ball mount on the back of the phone holder is also used to adjust the width of the frame and retention wheels. Pulling against the ball releases the spring-loaded gear and allows you to twist clockwise or counter-clockwise to adjust the width to your phone. To find the correct position for your phone, adjust the arms so that your phone is securely held in place. Your phone should roll firmly into place with one-handed operation when the settings are correct.

The included Universal Smartphone Harness and Tether features a flexible and grippy silicone interface, this harness accommodates devices with or without a case, ensuring that your phone is snugly held in place. Included with the harness is a coiled coated steel tether (9" coiled, 48" fully stretched) with locking carabiner. The carabiner is designed to attach to the tether point found on the frame of the phone holder giving you extra peace of mind that you phone is safe and sound. Engineered for ease of use, the harness allows for effortless access to your phone’s functions and is designed to not interfere or block the camera lens.

The YakAttack RotoGrip Phone Holder is built from UV-resistant, high-quality, injection-molded polymers and assembled with stainless steel hardware. Designed to withstand years of use in harsh outdoor and marine environments, the RotoGrip Phone Holder is backed by our Built for Life Guarantee. This phone holder is designed to securely hold your smartphone while on the water. However, we are not liable for any loss, damage, or malfunction of your device during use. It is essential to use the included harness and tether and ensure your phone is properly secured. Use at your own risk.
In typical YakAttack fashion, what started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with more versatility than we could have imagined. While the DoubleHeader track mount has come available in multiple variations, it is now the foundation for a track-mounted offset holder for the YakAttack LeaderBoard.

The LeaderBoard DoubleHeader is only compatible with the YakAttack LeaderBoard. The custom-designed LeaderBoard RotoGrips will not fit measuring/bump boards from other manufacturers.

Like the DoubleHeader and its other variations, the LeaderBoard DoubleHeader offers the user a 3.5” offset from a single point of attachment so as not to tie up valuable track space or block the gunnel of your kayak, allowing for the full functionality of other accessories. As mentioned above, the redesigned RotoGrips featured on this DoubleHeader are unique to the shape of the LeaderBoard. Insert the underside of the LeaderBoard into the hooked side of the RotoGrip and rotate the board towards the wheels until it is in a vertical orientation and locked into place. The LeaderBoard will only release in one direction to prevent you from accidentally knocking it out into the water. To release and remove the LeaderBoard, roll the board away from the RotoGrip wheels towards the hooks, and the board will come out with ease.

The stock positioning of the RotoGrips is set up so the underside of the LeaderBoard is facing outwards, but this can easily be changed to accommodate the uniqueness of how every kayak angler sets up their kayak. To reverse the positioning of the RotoGrips so the underside of the board is facing inwards, simply grab and rotate the RotoGrip 180 degrees. You should feel the RotoGrip settle into position every 90 degrees as there is a built-in detent on the underside to keep the RotoGrips in the orientation you want.

The DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Replace the stock knob from the DoubleHeader with the LockNLoad base of a rod holder or other accessories. Included with the LeaderBoard DoubleHeader are two different Track Disks. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both and determine which one will provide the best fit.

The DoubleHeader with Dual RotoGrip Paddle Holders is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.
In typical YakAttack fashion, what started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The DoubleHeader track mount can serve several different purposes, but in this case, it is the foundation for the perfect offset ParkNPole holder that our customers have been asking for since the release of the DoubleHeader with dual RotoGrip paddle holders. Compatible with 0.84” diameter shafts, the DoubleHeader with dual ParkNPole RotoGrips has become a popular solution for kayakers needing a place to stow their stake out poles, but before customers had to buy the individual parts and assemble it on their own. Not anymore.

The same as using two RotoGrips on a single piece of track for a paddle, you cover up the entire length of the track with your paddle, rendering open track space useless. The DoubleHeader in this configuration eliminates that problem entirely and offsets the ParkNPole RotoGrips from the kayak allowing for the full functionality of the remaining track space for other accessories. If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.

Included with the DoubleHeader are two different Track Disks. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.

For added ParkNPole security, included with the DoubleHeader and ParkNPole RotoGrip’s are two SnapNStrap Security Tethers. To secure your ParkNPole, unhook the bungee tab from the stored position on the base of the DoubleHeader, wrap it around the shaft of your pole, and loop it over the tab on the outward side of the ParkNPole RotoGrip.

The DoubleHeader with Dual ParkNPole RotoGrips is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.
YakAttack AMS-1003-DS LeverLoc Anchor Trolley, Desert Sand YakAttack AMS-1003-OG LeverLoc Anchor Trolley, Olive Green YakAttack AMS-1004-OG LeverLoc Anchor Trolley HD, Olive Green

The Desert Sand and Olive Green color options are part of our 2022 Fall Color Release. These are not part of a special or limited edition run. Instead, if a product/color sells well and the response from our retailers and customers are positive then a color in a specific product might stick around for a few seasons.

The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord. Features YakAttack Stealth Pulleys for super smooth operation.

The Desert Sand and Olive Green color options are part of our 2022 Fall Color Release. These are not part of a special or limited edition run. Instead, if a product/color sells well and the response from our retailers and customers are positive then a color in a specific product might stick around for a few seasons.

The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord. Features YakAttack Stealth Pulleys for super smooth operation.

The Desert Sand and Olive Green color options are part of our 2022 Fall Color Release. These are not part of a special or limited edition run. Instead, if a product/color sells well and the response from our retailers and customers are positive then a color in a specific product might stick around for a few seasons.

The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord. This model features the HD option, which gets you two extra PadHooks plus backing plates for the pulleys and LeverLoc™, enabling a heavy duty install when compared to the self-threading screws included in the standard kit. Features YakAttack Stealth Pulleys for super smooth operation. The use of a YakAttack Rigging Bullet, RB1032, is highly recommend for installs where the install location is out of arms reach.
YakAttack AMS-1004-DS LeverLoc Anchor Trolley HD, Desert Sand RotoGrip Phone Holder with 1" Screwball Track Mount Yak Attack 13X13 Shortstak Upgrade Kit For Blackpak Pro, Black

The Desert Sand and Olive Green color options are part of our 2022 Fall Color Release. These are not part of a special or limited edition run. Instead, if a product/color sells well and the response from our retailers and customers are positive then a color in a specific product might stick around for a few seasons.

The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord. This model features the HD option, which gets you two extra PadHooks plus backing plates for the pulleys and LeverLoc™, enabling a heavy duty install when compared to the self-threading screws included in the standard kit. Features YakAttack Stealth Pulleys for super smooth operation. The use of a YakAttack Rigging Bullet, RB1032, is highly recommend for installs where the install location is out of arms reach.
The YakAttack RotoGrip Phone Holder Pro is exactly the phone holder you would expect from YakAttack. Its revolutionary design is unlike anything that exists on the market and utilizes our popular RotoGrip technology allowing for quick one-handed operation. The phone holder features two adjustable rubber wheels that securely holds most modern-day smartphones and the width settings can easily be adjusted. Compatible with smartphones ranging from: 2.75” to 3.625” wide, 0.303” to 0.625” in thickness.

This version of the RotoGrip Phone Holder includes a Universal Smartphone Harness and Tether, track-mounted 1” Screwball, and 2.5” long Ball Connector. The Screwball is compatible with all YakAttack GearTrac, MightyMounts, and most other factory installed kayak track systems.

Built into the phone holder is our 1” ball system that allows for easy articulation to achieve a wide variety of positions. The 1” ball mount on the back of the phone holder is also used to adjust the width of the frame and retention wheels. Pulling against the ball releases the spring-loaded gear and allows you to twist clockwise or counter-clockwise to adjust the width to your phone. To find the correct position for your phone, adjust the arms so that your phone is securely held in place. Your phone should roll firmly into place with one-handed operation when the settings are correct.

The included Universal Smartphone Harness and Tether features a flexible and grippy silicone interface, this harness accommodates devices with or without a case, ensuring that your phone is snugly held in place. Included with the harness is a coiled coated steel tether (9" coiled, 48" fully stretched) with locking carabiner. The carabiner is designed to attach to the tether point found on the frame of the phone holder giving you extra peace of mind that you phone is safe and sound. Engineered for ease of use, the harness allows for effortless access to your phone’s functions and is designed to not interfere or block the camera lens.

The YakAttack RotoGrip Phone Holder is built from UV-resistant, high-quality, injection-molded polymers and assembled with stainless steel hardware. Designed to withstand years of use in harsh outdoor and marine environments, the RotoGrip Phone Holder is backed by our Built for Life Guarantee. This phone holder is designed to securely hold your smartphone while on the water. However, we are not liable for any loss, damage, or malfunction of your device during use. It is essential to use the included harness and tether and ensure your phone is properly secured. Use at your own risk.
Following the release of the reimagined BlackPak Pro, it has been clear that for many anglers, bigger is better. With that concept in mind, our design team began working on solutions to increase the usable space, inside and outside, of the BlackPak Pro. The resulting product does all of that, and will come in three different sizes to fit all three BlackPak Pro models. Please note, this is not a stand-alone box and requires the use of a BlackPak Pro.

The ShortStak Upgrade Kit is a stackable box that replaces the lid of a new or existing BlackPak Pro, giving you a second layer of storage for quick access go-to items. Its construction is virtually the same as the BlackPak Pro, however, it is only about 40% of the original height. The bottom edge of the ShortStak side panels is angled to match the geometry of the BlackPak opening, giving you the same water-shedding fit as the original lid.

Why would you need a ShortStak addition to your BlackPak Pro? Aside from the obvious, more space for more gear, the possibilities are numerous depending on your style of fishing. If you are like most anglers, your BlackPak Pro is loaded with anything and everything you might need for a day on the water. Sometimes, gear in the bottom of the BlackPak can be difficult to reach from the high-seated position of most modern-day fishing kayaks. Having the ability to build additional space, and gain quick and easy access to your most needed items is vital for anyone who believes in optimizing their efficiency on the water to increase their chances of success. Another scenario would be anyone using electronics and housing their batteries, live scope black box, and excess cables inside of their BlackPak Pro. Regaining that lost storage space is an upgrade that would prove it's worth on every adventure.

The design of the ShortStak inherits many of the same features found on the BlackPak Pro. From lightweight injection molded parts and tongue and groove assembly, to the GridLoc mounting platform found inside and outside the crate, making it obvious they were made for each other. An addition of heavy-duty hinges and support straps were critical to restrict any overtravel of the larger top compartment to prevent damage to your BlackPak. Overall, the length and width dimensions of the ShortStak will match the corresponding BlackPak. The interior depth of the ShortStak will be 4.25 inches across all three sizes.

The ShortStak features the same GridLoc 2D mounting platform as the BlackPak Pro which offers molded screw bosses giving you the ability to attach accessories inside and outside of the panels. Accessories including the GridLoc MightyMounts and MightyMount XL, Through Hull Wiring Kits, TracPaks, and more.

What is Included with the ShortStak Upgrade Kit:

Included in the ShortStak Upgrade Kit, you will receive four ShortStak Side Panels, one Bottom Panel, four rubber ShortStak Bumpers, one pair of hinges, one pair of ShortStak Catches, one pair of Latches, one pair of straps, and all of the stainless steel hardware needed for the assembly. As an upgrade kit for the BlackPak Pro, the ShortStak does not include a lid.

Construction:

Injection-molded from UV stabilized polymers, the ShortStak will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.
Yak Attack 13X13 Shortstak Upgrade Kit For Blackpak Pro, Yakattack Orange Yak Attack 13x13 ShortStak Upgrade Kit for BlackPak Pro, Battleship Grey Yak Attack 13X16 Shortstak Upgrade Kit For Blackpak Pro, Black
Following the release of the reimagined BlackPak Pro, it has been clear that for many anglers, bigger is better. With that concept in mind, our design team began working on solutions to increase the usable space, inside and outside, of the BlackPak Pro. The resulting product does all of that, and will come in three different sizes to fit all three BlackPak Pro models. Please note, this is not a stand-alone box and requires the use of a BlackPak Pro.

The ShortStak Upgrade Kit is a stackable box that replaces the lid of a new or existing BlackPak Pro, giving you a second layer of storage for quick access go-to items. Its construction is virtually the same as the BlackPak Pro, however, it is only about 40% of the original height. The bottom edge of the ShortStak side panels is angled to match the geometry of the BlackPak opening, giving you the same water-shedding fit as the original lid.

Why would you need a ShortStak addition to your BlackPak Pro? Aside from the obvious, more space for more gear, the possibilities are numerous depending on your style of fishing. If you are like most anglers, your BlackPak Pro is loaded with anything and everything you might need for a day on the water. Sometimes, gear in the bottom of the BlackPak can be difficult to reach from the high-seated position of most modern-day fishing kayaks. Having the ability to build additional space, and gain quick and easy access to your most needed items is vital for anyone who believes in optimizing their efficiency on the water to increase their chances of success. Another scenario would be anyone using electronics and housing their batteries, live scope black box, and excess cables inside of their BlackPak Pro. Regaining that lost storage space is an upgrade that would prove it's worth on every adventure.

The design of the ShortStak inherits many of the same features found on the BlackPak Pro. From lightweight injection molded parts and tongue and groove assembly, to the GridLoc mounting platform found inside and outside the crate, making it obvious they were made for each other. An addition of heavy-duty hinges and support straps were critical to restrict any overtravel of the larger top compartment to prevent damage to your BlackPak. Overall, the length and width dimensions of the ShortStak will match the corresponding BlackPak. The interior depth of the ShortStak will be 4.25 inches across all three sizes.

The ShortStak features the same GridLoc 2D mounting platform as the BlackPak Pro which offers molded screw bosses giving you the ability to attach accessories inside and outside of the panels. Accessories including the GridLoc MightyMounts and MightyMount XL, Through Hull Wiring Kits, TracPaks, and more.

What Included with the ShortStak Upgrade Kit:

Included in the ShortStak Upgrade Kit, you will receive four ShortStak Side Panels, one Bottom Panel, four rubber ShortStak Bumpers, one pair of hinges, one pair of ShortStak Catches, one pair of Latches, one pair of straps, and all of the stainless steel hardware needed for the assembly. As an upgrade kit for the BlackPak Pro, the ShortStak does not include a lid.

Construction:

Injection-molded from UV stabilized polymers, the ShortStak will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.
Following the release of the reimagined BlackPak Pro, it has been clear that for many anglers, bigger is better. With that concept in mind, our design team began working on solutions to increase the usable space, inside and outside, of the BlackPak Pro. The resulting product does all of that, and will come in three different sizes to fit all three BlackPak Pro models. Please note, this is not a stand-alone box and requires the use of a BlackPak Pro.

The ShortStak Upgrade Kit is a stackable box that replaces the lid of a new or existing BlackPak Pro, giving you a second layer of storage for quick access go-to items. Its construction is virtually the same as the BlackPak Pro, however, it is only about 40% of the original height. The bottom edge of the ShortStak side panels is angled to match the geometry of the BlackPak opening, giving you the same water-shedding fit as the original lid.

Why would you need a ShortStak addition to your BlackPak Pro? Aside from the obvious, more space for more gear, the possibilities are numerous depending on your style of fishing. If you are like most anglers, your BlackPak Pro is loaded with anything and everything you might need for a day on the water. Sometimes, gear in the bottom of the BlackPak can be difficult to reach from the high-seated position of most modern-day fishing kayaks. Having the ability to build additional space, and gain quick and easy access to your most needed items is vital for anyone who believes in optimizing their efficiency on the water to increase their chances of success. Another scenario would be anyone using electronics and housing their batteries, live scope black box, and excess cables inside of their BlackPak Pro. Regaining that lost storage space is an upgrade that would prove it's worth on every adventure.

The design of the ShortStak inherits many of the same features found on the BlackPak Pro. From lightweight injection molded parts and tongue and groove assembly, to the GridLoc mounting platform found inside and outside the crate, making it obvious they were made for each other. An addition of heavy-duty hinges and support straps were critical to restrict any overtravel of the larger top compartment to prevent damage to your BlackPak. Overall, the length and width dimensions of the ShortStak will match the corresponding BlackPak. The interior depth of the ShortStak will be 4.25 inches across all three sizes.

The ShortStak features the same GridLoc 2D mounting platform as the BlackPak Pro which offers molded screw bosses giving you the ability to attach accessories inside and outside of the panels. Accessories including the GridLoc MightyMounts and MightyMount XL, Through Hull Wiring Kits, TracPaks, and more.

What Included with the ShortStak Upgrade Kit:

Included in the ShortStak Upgrade Kit, you will receive four ShortStak Side Panels, one Bottom Panel, four rubber ShortStak Bumpers, one pair of hinges, one pair of ShortStak Catches, one pair of Latches, one pair of straps, and all of the stainless steel hardware needed for the assembly. As an upgrade kit for the BlackPak Pro, the ShortStak does not include a lid.

Construction:

Injection-molded from UV stabilized polymers, the ShortStak will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.
Following the release of the reimagined BlackPak Pro, it has been clear that for many anglers, bigger is better. With that concept in mind, our design team began working on solutions to increase the usable space, inside and outside, of the BlackPak Pro. The resulting product does all of that, and will come in three different sizes to fit all three BlackPak Pro models. Please note, this is not a stand-alone box and requires the use of a BlackPak Pro.

The ShortStak Upgrade Kit is a stackable box that replaces the lid of a new or existing BlackPak Pro, giving you a second layer of storage for quick access go-to items. Its construction is virtually the same as the BlackPak Pro, however, it is only about 40% of the original height. The bottom edge of the ShortStak side panels is angled to match the geometry of the BlackPak opening, giving you the same water-shedding fit as the original lid.

Why would you need a ShortStak addition to your BlackPak Pro? Aside from the obvious, more space for more gear, the possibilities are numerous depending on your style of fishing. If you are like most anglers, your BlackPak Pro is loaded with anything and everything you might need for a day on the water. Sometimes, gear in the bottom of the BlackPak can be difficult to reach from the high-seated position of most modern-day fishing kayaks. Having the ability to build additional space, and gain quick and easy access to your most needed items is vital for anyone who believes in optimizing their efficiency on the water to increase their chances of success. Another scenario would be anyone using electronics and housing their batteries, live scope black box, and excess cables inside of their BlackPak Pro. Regaining that lost storage space is an upgrade that would prove it's worth on every adventure.

The design of the ShortStak inherits many of the same features found on the BlackPak Pro. From lightweight injection molded parts and tongue and groove assembly, to the GridLoc mounting platform found inside and outside the crate, making it obvious they were made for each other. An addition of heavy-duty hinges and support straps were critical to restrict any overtravel of the larger top compartment to prevent damage to your BlackPak. Overall, the length and width dimensions of the ShortStak will match the corresponding BlackPak. The interior depth of the ShortStak will be 4.25 inches across all three sizes.

The ShortStak features the same GridLoc 2D mounting platform as the BlackPak Pro which offers molded screw bosses giving you the ability to attach accessories inside and outside of the panels. Accessories including the GridLoc MightyMounts and MightyMount XL, Through Hull Wiring Kits, TracPaks, and more.

What is Included with the ShortStak Upgrade Kit:

Included in the ShortStak Upgrade Kit, you will receive four ShortStak Side Panels, one Bottom Panel, four rubber ShortStak Bumpers, one pair of hinges, one pair of ShortStak Catches, one pair of Latches, one pair of straps, and all of the stainless steel hardware needed for the assembly. As an upgrade kit for the BlackPak Pro, the ShortStak does not include a lid.

Construction:

Injection-molded from UV stabilized polymers, the ShortStak will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.
Yak Attack 13X16 Shortstak Upgrade Kit For Blackpak Pro, Yakattack Orange Yak Attack 13x16 ShortStak Upgrade Kit for BlackPak Pro, Battleship Grey Yak Attack 16X16 Shortstak Upgrade Kit For Blackpak Pro, Black
Following the release of the reimagined BlackPak Pro, it has been clear that for many anglers, bigger is better. With that concept in mind, our design team began working on solutions to increase the usable space, inside and outside, of the BlackPak Pro. The resulting product does all of that, and will come in three different sizes to fit all three BlackPak Pro models. Please note, this is not a stand-alone box and requires the use of a BlackPak Pro.

The ShortStak Upgrade Kit is a stackable box that replaces the lid of a new or existing BlackPak Pro, giving you a second layer of storage for quick access go-to items. Its construction is virtually the same as the BlackPak Pro, however, it is only about 40% of the original height. The bottom edge of the ShortStak side panels is angled to match the geometry of the BlackPak opening, giving you the same water-shedding fit as the original lid.

Why would you need a ShortStak addition to your BlackPak Pro? Aside from the obvious, more space for more gear, the possibilities are numerous depending on your style of fishing. If you are like most anglers, your BlackPak Pro is loaded with anything and everything you might need for a day on the water. Sometimes, gear in the bottom of the BlackPak can be difficult to reach from the high-seated position of most modern-day fishing kayaks. Having the ability to build additional space, and gain quick and easy access to your most needed items is vital for anyone who believes in optimizing their efficiency on the water to increase their chances of success. Another scenario would be anyone using electronics and housing their batteries, live scope black box, and excess cables inside of their BlackPak Pro. Regaining that lost storage space is an upgrade that would prove it's worth on every adventure.

The design of the ShortStak inherits many of the same features found on the BlackPak Pro. From lightweight injection molded parts and tongue and groove assembly, to the GridLoc mounting platform found inside and outside the crate, making it obvious they were made for each other. An addition of heavy-duty hinges and support straps were critical to restrict any overtravel of the larger top compartment to prevent damage to your BlackPak. Overall, the length and width dimensions of the ShortStak will match the corresponding BlackPak. The interior depth of the ShortStak will be 4.25 inches across all three sizes.

The ShortStak features the same GridLoc 2D mounting platform as the BlackPak Pro which offers molded screw bosses giving you the ability to attach accessories inside and outside of the panels. Accessories including the GridLoc MightyMounts and MightyMount XL, Through Hull Wiring Kits, TracPaks, and more.

What Included with the ShortStak Upgrade Kit:

Included in the ShortStak Upgrade Kit, you will receive four ShortStak Side Panels, one Bottom Panel, four rubber ShortStak Bumpers, one pair of hinges, one pair of ShortStak Catches, one pair of Latches, one pair of straps, and all of the stainless steel hardware needed for the assembly. As an upgrade kit for the BlackPak Pro, the ShortStak does not include a lid.

Construction:

Injection-molded from UV stabilized polymers, the ShortStak will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.
Following the release of the reimagined BlackPak Pro, it has been clear that for many anglers, bigger is better. With that concept in mind, our design team began working on solutions to increase the usable space, inside and outside, of the BlackPak Pro. The resulting product does all of that, and will come in three different sizes to fit all three BlackPak Pro models. Please note, this is not a stand-alone box and requires the use of a BlackPak Pro.

The ShortStak Upgrade Kit is a stackable box that replaces the lid of a new or existing BlackPak Pro, giving you a second layer of storage for quick access go-to items. Its construction is virtually the same as the BlackPak Pro, however, it is only about 40% of the original height. The bottom edge of the ShortStak side panels is angled to match the geometry of the BlackPak opening, giving you the same water-shedding fit as the original lid.

Why would you need a ShortStak addition to your BlackPak Pro? Aside from the obvious, more space for more gear, the possibilities are numerous depending on your style of fishing. If you are like most anglers, your BlackPak Pro is loaded with anything and everything you might need for a day on the water. Sometimes, gear in the bottom of the BlackPak can be difficult to reach from the high-seated position of most modern-day fishing kayaks. Having the ability to build additional space, and gain quick and easy access to your most needed items is vital for anyone who believes in optimizing their efficiency on the water to increase their chances of success. Another scenario would be anyone using electronics and housing their batteries, live scope black box, and excess cables inside of their BlackPak Pro. Regaining that lost storage space is an upgrade that would prove it's worth on every adventure.

The design of the ShortStak inherits many of the same features found on the BlackPak Pro. From lightweight injection molded parts and tongue and groove assembly, to the GridLoc mounting platform found inside and outside the crate, making it obvious they were made for each other. An addition of heavy-duty hinges and support straps were critical to restrict any overtravel of the larger top compartment to prevent damage to your BlackPak. Overall, the length and width dimensions of the ShortStak will match the corresponding BlackPak. The interior depth of the ShortStak will be 4.25 inches across all three sizes.

The ShortStak features the same GridLoc 2D mounting platform as the BlackPak Pro which offers molded screw bosses giving you the ability to attach accessories inside and outside of the panels. Accessories including the GridLoc MightyMounts and MightyMount XL, Through Hull Wiring Kits, TracPaks, and more.

What Included with the ShortStak Upgrade Kit:

Included in the ShortStak Upgrade Kit, you will receive four ShortStak Side Panels, one Bottom Panel, four rubber ShortStak Bumpers, one pair of hinges, one pair of ShortStak Catches, one pair of Latches, one pair of straps, and all of the stainless steel hardware needed for the assembly. As an upgrade kit for the BlackPak Pro, the ShortStak does not include a lid.

Construction:

Injection-molded from UV stabilized polymers, the ShortStak will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.
Following the release of the reimagined BlackPak Pro, it has been clear that for many anglers, bigger is better. With that concept in mind, our design team began working on solutions to increase the usable space, inside and outside, of the BlackPak Pro. The resulting product does all of that, and will come in three different sizes to fit all three BlackPak Pro models. Please note, this is not a stand-alone box and requires the use of a BlackPak Pro.

The ShortStak Upgrade Kit is a stackable box that replaces the lid of a new or existing BlackPak Pro, giving you a second layer of storage for quick access go-to items. Its construction is virtually the same as the BlackPak Pro, however, it is only about 40% of the original height. The bottom edge of the ShortStak side panels is angled to match the geometry of the BlackPak opening, giving you the same water-shedding fit as the original lid.

Why would you need a ShortStak addition to your BlackPak Pro? Aside from the obvious, more space for more gear, the possibilities are numerous depending on your style of fishing. If you are like most anglers, your BlackPak Pro is loaded with anything and everything you might need for a day on the water. Sometimes, gear in the bottom of the BlackPak can be difficult to reach from the high-seated position of most modern-day fishing kayaks. Having the ability to build additional space, and gain quick and easy access to your most needed items is vital for anyone who believes in optimizing their efficiency on the water to increase their chances of success. Another scenario would be anyone using electronics and housing their batteries, live scope black box, and excess cables inside of their BlackPak Pro. Regaining that lost storage space is an upgrade that would prove it's worth on every adventure.

The design of the ShortStak inherits many of the same features found on the BlackPak Pro. From lightweight injection molded parts and tongue and groove assembly, to the GridLoc mounting platform found inside and outside the crate, making it obvious they were made for each other. An addition of heavy-duty hinges and support straps were critical to restrict any overtravel of the larger top compartment to prevent damage to your BlackPak. Overall, the length and width dimensions of the ShortStak will match the corresponding BlackPak. The interior depth of the ShortStak will be 4.25 inches across all three sizes.

The ShortStak features the same GridLoc 2D mounting platform as the BlackPak Pro which offers molded screw bosses giving you the ability to attach accessories inside and outside of the panels. Accessories including the GridLoc MightyMounts and MightyMount XL, Through Hull Wiring Kits, TracPaks, and more.

What is Included with the ShortStak Upgrade Kit:

Included in the ShortStak Upgrade Kit, you will receive four ShortStak Side Panels, one Bottom Panel, four rubber ShortStak Bumpers, one pair of hinges, one pair of ShortStak Catches, one pair of Latches, one pair of straps, and all of the stainless steel hardware needed for the assembly. As an upgrade kit for the BlackPak Pro, the ShortStak does not include a lid.

Construction:

Injection-molded from UV stabilized polymers, the ShortStak will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.